Learn how to make your painting project look professional!
Primer comes before paint.
Tempted to skip the primer? Primer not only provides a good surface for the paint, but it also brings out the paint’s true color.
Paint like a pro.
Painting is your chance to show off your skills. Use an edge pad for clean lines around doorframes, ceiling edges and corners so your walls look great — down to every last detail.
Create a sticky situation.
Paint won’t stick to the wall if you haven’t taken the time to prep. The surface must be clean, non-glossy and in good condition.
One gallon at a time.
How much paint will it take to cover your walls? The pros recommend one gallon for every 400 square feet. Covering textured, rough or unprimed surfaces may require more.
Dry days make good painting days.
Moisture in the air keeps water-based paint from drying. Skip the humid afternoon paint project and slow drying walls won’t wreck the rest of your day.
Put your sandwich bags to work.
Slip a small plastic bag over your doorknobs and tape the edge to avoid getting paint in places it wasn’t meant to go. You’re so resourceful.
Out with the old.
If the old paint on your wall is flaking off, it’s a good idea to buy a paint scraper and get it out of the way. Once all the old paint is gone, sand the surface smooth, prime and your new paint will look great.
If you’re looking for paint in high-traffic areas, semi-gloss is the way to go. Shiny and durable, semi-gloss is a parent’s best friend.
Give the walls a sponge bath.
Washing your walls from top to bottom is always recommended because paint sticks better to a clean surface.
Don’t look back.
Once an area starts to dry, it’s best to leave it alone. Going back over it can leave marks and color streaks in the paint’s surface.
Polka dots look good on fabric—not floors.
Unless you’re trying to paint your floor, we recommend covering it up with a drop cloth. It’s the cheap, easy way to save yourself a whole lot of irritation.
Take away the shine.
Paint doesn’t always adhere to glossy surfaces. We recommend using a light grade sandpaper to take the gloss off the surface so your new paint sticks like it should.
Turn in the brush.
Small rooms can feel gigantic when it comes to painting. A roller will do a better job than a paint brush in less time.
Spare the wall plates.
Before you start, remove all wall plates and tape off light switches and electrical outlets. You’ll get high marks for professional-looking results.
Patience is a virtue.
You’ve completed your mission to fix every imperfection with patching compound. Now, make sure it’s dry. Then sand smooth, prime, and you’ll have a surface good enough for any pro.
from DIY Network